View HA-2520883_277652.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HA-2520/883 HA-2522/883
July 1994
Uncompensated, High Slew Rate Operational Amplifiers
Description
Description The HA-2520/883 and HA-2522/883 are monolithic operational amplifiers which deliver an unsurpassed combination of specifications for slew rate, bandwidth and settling time. These dielectrically isolated amplifiers are designed for closed loop gains of 3 or greater without external compensation. In addition, these high performance components also provide low offset current and high input impedance. The 100V/s (min) slew rate (80V/s for HA-2522/883) and fast settling time of these amplifiers make them ideal components for pulse amplification and data acquisition designs. To insure compliance with slew rate and transient response specifications, all devices are 100% tested for AC performance characteristics over full temperature. These devices are valuable components for RF and video circuitry requiring wideband operation. For accurate signal conditioning designs, the HA-2520/883's superior dynamic specifications are complemented by 25nA (max) offset current (50nA for HA-2522/883) and offset voltage adjust capability.
Features
* This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. * High Slew Rate (HA-2520/883) . . . . . . . . 100V/s (Min) 120V/s (Typ) * Wide Power Bandwidth (HA-2520/883) . . 1.5MHz (Min) * Wide Gain Bandwidth (HA-2520/883) . . . . 10MHz (Min) 20MHz (Typ) * High Input Impedance (HA-2520/883). . . . . 50M (Min) 100M (Typ) * Low Offset Current (HA-2520/883) . . . . . . . . 25nA (Min) 10nA (Typ) * Fast Settling (0.1% of 10V Step) . . . . . . . . . 200ns (Typ) * Low Quiescent Supply Current . . . . . . . . . . 6mA (Max)
Applications
* Data Acquisition Systems * RF Amplifiers * Video Amplifiers * Signal Generators * Pulse Amplification
Ordering Information
PART NUMBER HA2-2520/883 HA2-2522/883 HA4-2522/883 HA7-2520/883 HA7-2522/883 TEMPERATURE RANGE -55oC -55oC to to +125oC +125oC PACKAGE 8 Pin Can 8 Pin Can 20 Lead Ceramic LCC 8 Lead CerDIP 8 Lead CerDIP
-55oC to +125oC -55oC -55oC to to +125oC +125oC
Pinouts
HA-2520/883, HA-2522/883 (CERDIP) TOP VIEW HA-2522/883 (CLCC) TOP VIEW
BAL COMP NC NC NC
HA-2520/883, HA-2522/883 (METAL CAN) TOP VIEW
COMP 8
BAL -IN +IN V-
1 2 3 4 +
8 7 6 5
COMP V+ OUT BAL NC -IN NC +IN NC 4 5 6
3
2
1
20 19 18 NC
BAL 17 V+ 16 NC
1 + 3 4 V-
7 V+
+
-IN
2
6 OUT
7 8 9 NC 10 11 12 13 VNC BAL NC
15 OUT 14 NC
+IN
5
BAL
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999
Spec Number
3-150
511004-883 File Number 3735
Specifications HA-2520/883, HA-2522/883
Absolute Maximum Ratings
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 40V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to VPeak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +300oC
Thermal Information
Thermal Resistance JA JC CerDIP Package . . . . . . . . . . . . . . . . . . . 115oC/W 28oC/W Ceramic LCC Package . . . . . . . . . . . . . . 75oC/W 23oC/W Metal Can Package . . . . . . . . . . . . . . . . . 160oC/W 75oC/W Package Power Dissipation Limit at +75oC for TJ +175oC CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.33W Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625mW Package Power Dissipation Derating Factor Above +75oC CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/oC Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . 13.3mW/oC Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3mW/oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V VINCM 1/2 (V+ - V-) RL 2k
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RSOURCE = 100, RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified. GROUP A SUBGROUPS 1 2, 3 +IB VCM = 0V, +RS = 100k, -RS = 100 VCM = 0V, +RS = 100, -RS = 100k VCM = 0V, +RS = 100k, -RS = 100k V+ = 5V, V- = -25V 1 2, 3 1 2, 3 1 2, 3 1 2, 3 -CMR V+ = 25V, V- = -5V 1 2, 3 Large Signal Voltage Gain +AVOL VOUT = 0V and +10V, RL = 2k VOUT = 0V and -10V, RL = 2k VCM = +10V, V+ = +5V, V- = -25V, VOUT = -10V VCM = -10V, V+ = +25V, V- = -5V, VOUT = +10V RL = 2k 4 5, 6 4 5, 6 1 2, 3 1 2, 3 4 5, 6 -VOUT RL = 2k 4 5, 6 HA-2520/883 TEMPERATURE +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC MIN -8 -10 -200 -400 -200 -400 -25 -50 +10 +10 10 7.5 10 7.5 80 80 80 80 10 10 MAX 8 10 200 400 200 400 25 50 -10 -10 -10 -10 HA-2522/883 MIN -10 -14 -250 -500 -250 -500 -50 -100 +10 +10 7.5 5 7.5 5 74 74 74 74 10 10 MAX 10 14 250 500 250 500 50 100 -10 -10 -10 -10 UNITS mV mV nA nA nA nA nA nA V V V V kV/V kV/V kV/V kV/V dB dB dB dB V V V V
PARAMETERS Input Offset Voltage Input Bias Current
SYMBOL VIO
CONDITIONS VCM = 0V
-IB
Input Offset Current Common Mode Range
IIO
+CMR
-AVOL
Common Mode Rejection Ratio
+CMRR
-CMRR
Output Voltage Swing
+VOUT
Spec Number 3-151
511004-883
Specifications HA-2520/883, HA-2522/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 15V, RSOURCE = 100, RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified. GROUP A SUBGROUPS 4 5, 6 -IOUT VOUT = +10V 4 5, 6 Quiescent Power Supply Current +ICC VOUT = 0V, IOUT = 0mA 1 2, 3 -ICC VOUT = 0V, IOUT = 0mA 1 2, 3 Power Supply Rejection Ratio +PSRR VSUP = 10V, V+ = +20V, V- = -15V, V+ = +10V, V- = -15V VSUP = 10V, V+ = +15V, V- = -20V, V+ = +15V, V- = -10V Note 1 1 2, 3 1 2, 3 1 2, 3 -VIOAdj Note 1 1 2, 3 NOTE: 1. Offset adjustment range is [VIO (Measured) 1mV] minimum referred to output. This test is for functionality only to assure adjustment through 0V. HA-2520/883 TEMPERATURE +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC MIN 10 7.5 -6 -6.5 80 80 80 80 VIO-1 VIO-1 VIO+1 VIO+1 MAX -10 -7.5 6 6.5 HA-2522/883 MIN 10 7.5 -6 -7 74 74 74 74 VIO-1 VIO-1 VIO+1 VIO+1 MAX -10 -7.5 6 7 UNITS mA mA mA mA mA mA mA mA dB dB dB dB mV mV mV mV
PARAMETERS Output Current
SYMBOL +IOUT
CONDITIONS VOUT = -10V
-PSRR
Offset Voltage Adjustment
+VIOAdj
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 2k, CLOAD = 50pF, AVCL = +3V/V, Unless Otherwise Specified. GROUP A SUBGROUPS 7 8A, 8B 7 8A, 8B 7 8A, 8B 7 8A, 8B 7 8A, 8B -OS VOUT = 0 to -200mV 7 8A, 8B HA-2520/883 TEMPERATURE +25oC +125oC, -55oC MIN 100 84 100 84 MAX 50 55 50 55 40 45 40 45 HA-2522/883 MIN 80 60 80 60 MAX 50 60 50 60 50 60 50 60 UNITS V/s V/s V/s V/s ns ns ns ns % % % %
PARAMETERS Slew Rate
SYMBOL +SR
CONDITIONS VOUT = -5V to +5V 25% +SR 75% VOUT = +5V to -5V 75% -SR 25% VOUT = 0 to +200mV 10% TR 90% VOUT = 0 to -200mV 10% TF 90% VOUT = 0 to +200mV
-SR
+25oC +125oC, -55oC
Rise and Fall Time
TR
+25oC +125oC, -55oC
TF
+25oC +125oC, -55oC
Overshoot
+OS
+25oC +125oC, -55oC
+25oC +125oC, -55oC
Spec Number 3-152
511004-883
Specifications HA-2520/883, HA-2522/883
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Characterized at: VSUPPLY = 15V, RLOAD = 2k, CLOAD = 50pF, AV 3, CCOMP = 0pF, Unless Otherwise Specified. HA-2520/883 PARAMETERS Differential Input Resistance Full Power Bandwidth Full Power Bandwidth Minimum Closed Loop Stable Gain Quiescent Power Consumption NOTES: 1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2VPEAK). 3. Quiescent Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.) SYMBOL RIN GBWP CONDITIONS VCM = 0V VO = 200mV, fO = 10kHz VO = 200mV, fO = 1MHz FPBW CLSG PC VPEAK = 10V RL = 2k, CL = 50pF VOUT = 0V, IOUT = 0mA NOTES 1 1 1 1, 2 1 1, 3 TEMPERATURE +25oC +25oC +25 C +25oC -55oC to +125oC -55oC to +125oC
o
HA-2522/883 MIN 40 10 10 1.2 +3 MAX 210 UNITS M MHz MHz MHz V/V mW
MIN 50 10 10 1.6 +3 -
MAX 195
TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-In) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLES 1 AND 2) 1 1 (Note 1), 2, 3, 4, 5, 6, 7, 8A, 8B 1, 2, 3, 4, 5, 6, 7, 8A, 8B 1
Spec Number 3-153
511004-883
HA-2520/883, HA-2522/883 Die Characteristics
DIE DIMENSIONS: 67 x 57 x 19 mils 1 mils 1700 x 1440 x 483m 25.4m METALLIZATION: Type: Al, 1% Cu Thickness: 16kA 2kA GLASSIVATION: Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.) Silox Thickness: 12kA 2kA Nitride Thickness: 3.5kA 1.5kA WORST CASE CURRENT DENSITY: 0.26 x 105 A/cm2 SUBSTRATE POTENTIAL (Powered Up): Unbiased TRANSISTOR COUNT: HA-2520/883: 40 HA-2522/883: 40 PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
HA-2520/883, HA-2522/883
COMP V+ OUT BAL
BAL
-IN
+IN
V-
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Spec Number 3-154
511004-883

▲Up To Search▲

Price & Availability of HA-2520883

	To Download HA-2520883 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .